GBodyCentral.com  
  #1  
Old 05-23-2011, 08:41 PM
Poltergeist's Avatar
Poltergeist Poltergeist is offline
Just a ghost in the machine
 
Join Date: Aug 2010
Location: Ontario, Calif.
Posts: 2,748

Default Informational sites

New links/info will be added as member post it.



SBC reference guide

Bore/stroke/engine size, then block casting numbers, then cyl head casting numbers, then trans
gear ratios.

Learn to count and you got it made!

http://www.v8s-series.freeservers.com/sbc.htm

========================================================================================================

The ultimate driveshaft info page!

This site also gives you the best info on measuring driveshafts, and setting up your whole driveline, that I've ever seen. Check it out! All you ever wanted to know, and more.

www.iedls.com


========================================================================================================

carburetor rebuild parts/chart


http://www.carbkitsource.com/index.html


Click on "tech info and service manuals" at the top of the page that link opens!


========================================================================================================

Parts from donor cars that fit G-bodies

From bowtiepower.com

'82-'02 S-10 upper and lower A-arms & spindles.
'98-'02 S-10 2W drive ZQ8 front spindles, rotors, & calipers
'82-'92 F-body lower front A-arms....steering stops need to be ground down
'82-'92 F-body lower rear control arms
'82-'92 F-body front sway bar....34 or 36mm bars
'82-'84 F-body aluminum rear drums
'87-'92 F-body aluminum radiator (5.7 auto trans.)....Modine 951
'87-'92 F-body XH steering box for 16" wheels upgrade
'88-'92 F-body serpentine belt setup (SBC)....use F-body alternator, P/S pump, A/C compressor, condensor, and lines
'84 S-10 manual brake drum wheel cylinders....Rabestos WC37644
'90 B-body master cylinder....Wagner 104660....for use with 12" brake conversion
1LE rear trailing arm bushings....10164152....(GM?)

MOOG PROBLEM SOLVER PARTS:

upper control arm bushing....Kit-K6411....cad plated shells with higher durometer rubber....Kit includes 4 bushings

lower control arm bushing....Kit-K6421....cad plated shells with higher durometer rubber....Kit includes 4 bushings

sway bar end links....K8988....cad plated bolts, nuts, sleeves, and washers....with polyurethane bushings

front sway bar bushing kit....thermoplastic....without tabs on mounting clamps....1 required
K6451-1"
K6453-1 1/8"
K6455-1 1/4"
K6457-1 5/16"
K6459-1 7/16"

idler arm....K6187T....bolt in heavy duty idler (same as '91-'96 B-body)

lower ball joints....K6145T....heavy duty lower ball joint

outer tie rod ends....ES2033RLT

inner tie rod ends....ES2034RLT

tie rod sleeves....ES2032RLT

center link....DS909

'98-'02 S-10 2W drive ZQ8 Steering box. Its also a fast raito box
__________________
1982 El Camino (Original owner)
LT1 from a '95 Impala
A bunch of other stuff check out my Garage
  #2  
Old 05-24-2011, 07:13 AM
nowukno's Avatar
nowukno nowukno is offline
Super Moderator


 
Join Date: Aug 2010
Location: So.Cal
Posts: 5,092

Default

__________________








My Garage
Closed Thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 01:54 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
vB.Sponsors