View Single Post
Old 02-18-2013, 10:46 PM
Bumpin1ohmSS's Avatar
Bumpin1ohmSS Bumpin1ohmSS is offline
Hot Rodder
Join Date: Sep 2010
Posts: 169

Played around with the UMI drag bar and Mocked it up. I also pulled the stock lines off the calipers and mocked up the Kore3 lines... Im gonna use my pipe cutter and pick up a flare kit to do a double flare on the cut down line..Frog tape is just to protect the finish while handling the parts...

Kore3 lines...

I'll get the flare kit later today and cut the lines and attempt to flare em. Wont know how they turned out til the rear is in the car. I should be good tho. I have some 3/16 tube and can practice on it. Wish me luck

Elco Warren

__/__/MyChevy is SoSuper!!!__/__/
Reply With Quote