Thread: Update
View Single Post
  #3  
Old 06-19-2013, 11:51 AM
crackice2001's Avatar
crackice2001 crackice2001 is offline
Gear Head
 
Join Date: Apr 2011
Location: Trinidad and Tobago
Posts: 36
Default

Well I finally ran the Mark Viii fan today on just jerry rig wiring.

I read that it would not fit on a big block in an intermediate chassis and that is quite true without modification. I had to move the radiator forward about three inches. I used a BFH and installed the fan upside down to clear the water pump pulley. It is now properly installed.

Back to today--I ran the engine and the fan tripped on at 180 degree and brought the temp back down to 160 in about 90 seconds and on the low speed too. This is a really excellent fan and I look forward to running it on the road after I tidy up the wiring to see how it works.

here is a pic of the fan installed.
Attached Images
File Type: jpg ABCD0011.jpg (90.3 KB, 6 views)
Reply With Quote